Siemens 2060isdn User Manual
Page 15
Installation
15
I_KAP01.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
Ring allocation
Ring allocation is the function which enables you to define
the user and MSN at which incoming calls are signalled or
to which calls are directed.
t
Meaning: see footnote
This is the menu for editing ring allocation. The current
setting is marked “active”. The options at your disposal are
as follows:
Example:
When an external call for number 12345678 is incoming,
the call is signalled simultaneously to the users having the
internal numbers 2, 3 and 5.
Wall-mounting the base station
If you want to have the base station wall-mounted, proceed as follows:
1. Drill two holes (Ø 5mm) one above the other with the centers 120 mm apart.
2. Insert wallplugs of the correct size.
3. Insert the two screws and tighten them until the gap between the wall and the underside
of the screw heads is approx. 5 mm.
4. Position the base station with the screw heads projecting into the slots in the rear and press
the base station down to engage the screws.
Ž
The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service
t System settings t Line data
t MSN n
Select the multiple subscriber number for which you want
to set ring allocation, for example MSN 1.
t Ring allocation
t Coll. call
Entering/changing collective call
The collective call list is displayed if you select “Collective
call“.
External phone number
Corresponding internal
users
12345678
2, 3, 5
t means: browse withu
or
u
and press
x
to confirm
Z
NEXT
OK