Siemens 2060isdn - Manual (Page 58)

System settings
58
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Example:
When an external call is incoming for MSN 12345678, the
users with internal numbers 2, 3 and 5 are called simulta-
neously, before signalling is extended to the users with in-
ternal numbers 2, 3, 5, 1 and 7.
Ring allocation: setting/changing number of cycles for group call
You can define the number of ring cycles for calling group
1 before ringing is extended to group 2. The default is 3
ring cycles. You can change this value to a setting be-
tween 1 and 9 cycles.
t Meaning: see footnote
The current setting is displayed, for example
“Set number of ring cycles 5“.
Example:
When an external call is incoming for MSN 12345678, the
users with internal numbers 2, 3 and 5 are called simulta-
neously for two ring cycles, before signalling is extended
to the users with internal numbers 2, 3, 5, 1 and 7.
External phone No. Call group 1 Call group 2
12345678 2, 3, 5 1, 7
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Line data
t MSN n Select the multiple subscriber number for which you want
to set the number of ring cycles, for example MSN 1.
t Ring allocation
x
Press this key if you merely want to check the setting.
or
OK
1 ... 9 Press the appropriate digit key to change the number of
ring cycles, for example 2.
x
Press this key to save your change. SAVE
External phone No. Call group 1 Call group 2
12345678 2, 3, 5 1, 7
t means: browse withu or u and press x to confirm Z NEXT OK