Siemens 2060isdn - Manual (Page 95)

Frequently asked questions
95
I_KAP07.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
● The intercept function enables you to trace callers who have suppressed display of their
phone number, malicious callers, etc. You can set up an intercept while that call is in
progress or up to 40 seconds after the call has been terminated, but the need for an inter-
cept must be verifiable on the part of the network provider.
You receive a printout from the network provider detailing the traced call, complete with
phone number, time and date.
5. Anonymous answer
What does anonymous answer mean?
● Anonymous answering means answering an incoming call without transmitting your own
phone number. Remember, however, that suppression of the own phone number is a ser-
vice that has to be obtained from the network provider. The Gigaset 2060isdn signals each
request for implementation of the feature to the network provider; no acknowledgment is
returned.
6. Selective call enable
What does selective call enable mean?
● Once you activate this feature all calls from phones having numbers other than those you
enter in a list (up to three numbers) are rejected. An ISDN user who places a rejected call is
notified to the effect that the user cannot be reached.
You can administrate the list from any mobile unit, provided you know the PIN code.
7. Callback on BUSY
How does this feature work and do any restrictions apply?
● The number you dial is busy, so you start this function by pressing the CALLBCK softkey.
When the number you dialed goes free you receive an automatic callback, which you accept
and at this point the original number is redialed. This is a standard-package feature which
you start as necessary. At this time it is supported only by digital exchanges.
● Callback on busy (CCBS)
8. Device type ID
What is the point of a device type ID?
● ISDN calls include device type IDs which make it possible to use MSNs selectively, with a
distinction drawn between individual services.
– Voice telephony: Gigaset 2060isdn setting = telephone/mobile unit
– a/b services (analog devices): Gigaset 2060isdn setting = neutral (neutral is suitable for
telephone, fax and modem operation)
● If you set a special ISDN ID such as modem/fax/telephone in the a/b line menu, restrictions
may apply when you dial digital connections.
9. Modem/fax
Do restrictions apply?
● The maximum data transmission rate for the top socket (permanently assigned internal
number 0) is 28.8 kb/s, while the bottom socket (permanently assigned internal number 9)
has a maximum data rate of 9.6 kb/s. Note ID 0 for ISDN access and ID 9 for internal traffic
at circuits 0 and 9. ISDN features are available, subject to restriction.
Dial pause: It is advisable, but not absolutely necessary, to program ID 0 for devices which