Siemens 2060isdn User Manual

Page 47

Call charges, call duration

I_KAP03.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

Activating/deactivating display of call duration or charges/setting call
charge factor

Your Gigaset 2060isdn can display either the telephone

time units or call charges or the duration of the call. Call-

duration display is active by default.

If you need call charges displayed or logged, you must ob-

tain the appropriate call data logging function from your

network provider. Bear in mind, however, that for billing

purposes the units counter of the network provider is al-

ways binding.
The display mode you select is valid for all mobile units.

Meaning: see footnote

This is the menu for choosing display of call duration or

call charges. The options at your disposal are as follows:

The comfort mobile unit is idle. You will be prompted to

enter the system code in the course of this procedure

(default code: “0000”).

.t Service

t System settings t Duration/units

t Call duration

Activate/deactivate display of call duration
This is a toggle: by activating call-duration display you au-

tomatically deactivate display of call charges.

t Units/charges

Activate/deactivate display of charge units
This is a toggle: by activating charge-unit display you auto-

matically deactivate display of call duration.

t Chge. unit –.––

Select charge factor with decimal point
Every time you change the charge factor the

charge totals are reset to zero.
Consequently, you should change the factor only at the

end of an accounting period.

t Chge. unit – – –

Select charge factor without decimal point
Every time you change the charge factor the

charge totals are reset to zero.
Consequently, you should change the factor only at the

end of an accounting period.
This is the mode for displaying charges in foreign currency

units.

t means: browse withu

and

press x

to confirm

NEXT