Siemens 2060isdn - Manual (Page 74)

Operation with supplementary devices
74
I_KAP04.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Starting an external consultation call:
Terminating an external consultation call
or
The call is returned to you if the user to whom you trans-
ferred fails to answer within 30 seconds.
Toggling
If you have a consultation call in progress you can switch
back and forth between the two calls as often as you
wish.
Toggling with a telephone set to pulse dialing
b You are conducting an external call.
º 9 0 Press these keys in succession to place the call on hold
and seize the ISDN trunk line.
o
Enter the phone number of the external user. The user
answers. You conduct your call with the external user.
º 8 Press. The original user is reconnected.
You resume your external call.
a Replace the handset.
Automatic recall is forced if you do not dial a
number within 30 seconds of pressing the
º 9 sequence.
b You are conducting a consultation call.
º 5 Press to toggle back to the original call.
º 5 Press again to toggle back to the consultation call, and so
on.
a Replace the handset to disconnect from the consultation
partner.
You are automatically recalled.
You can resume your original call.