Siemens 2060isdn - Manual (Page 53)

System settings
53
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
System settings
Setting the connection configuration for cordless internal users
You can define the types of device that can be used on the
system’s subscriber line circuits.
Cordless terminating devices can be mobile units or cord-
less devices such as the Gigaset 1000TAE. The default
setting for users of this type is “mobile unit”.
t Meaning: see footnote
Setting internal collective call
You can exclude registered mobile units or devices from
internal collective calls and cancel this exclusion. By de-
fault, all registered users are included for collective calls.
t Meaning: see footnote
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t a/b line
t Internal 1 In the “a/b line” menu, select a device circuit such as
“Internal 1”.
u x Select a device type from the “Device type” menu and
confirm your choice.
For example, select “Fax” for a fax machine connected to
a Gigaset 1000TAE.
NEXT SAVE
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Coll. call STN
x
Press this key if you merely want to check the setting.
or
u
x
Delete the internal number of your choice from the list or
re-include a number (0–9) deleted beforehand.
Save the list complete with your changes.
OK
X
SAVE
t means: browse withu or u and press x to confirm Z NEXT OK