Siemens 2060isdn User Manual
Page 85
Multicell system
85
I_KAP05.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
Setting multicell operation
t
Meaning: see footnote
After selecting and then confirming “Point to MP” and
thus activating this setting, select:
The message “internal connec. via S0 bus disabled” ap-
pears on the display.
Ž
The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service
t System settings t Configuration
t Point to MP
t multicell op
For operation with multiple base stations.
x
Press this softkey if you want to use the multicell system
with trunk access.
or
u
Press this softkey if you want to use the multicell system
behind a private branch exchange.
OK
ENABLE
If your telephone is set for multicell operation,
the CHANGE softkey appears automatically in
the display when an external call is in progress.
t means: browse withu
or
u
and
press x
to confirm
Z
NEXT
OK