Siemens 2060isdn - Manual (Page 32)

Outgoing calls
32
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Outgoing calls
Dialing external numbers with the keypad
Once base station and comfort mobile unit are in opera-
tion, you can generally telephone right away with a mobile
unit switched ON.
To terminate the call
ISDN trunk busy
If the ISDN trunk is in use by another Gigaset user, you
hear the busy tone and the message “Network section
busy” appears in the display.
Mobile unit not configured for trunk calls
If your mobile unit is not set to “trunk acc.” (➔ page 51),
you cannot set up external calls. The message “No ac-
cess rights” appears on the display.
(
No answer or station is busy
c Press the off-hook key.
o
Key in the phone number. The user answers and you con-
duct your external call.
or
u
Press if automatic line seizure is deactivated for this in-
ternal number (➔ page 26). MSNs are available for line
seizure if they were entered (➔ page 14). Use one of the
MSNs to set up the connection.
EXT.
a Press the on-hook key or place the mobile unit in the
charging unit.
Return the mobile unit to the base station or charging
unit. The connection is cleared down.
or
a Clear down the connection (the equivalent of replacing
the handset).
You can use the redial function if you want to try
to reach this user again later. If the station is
busy you also have the option of activating auto-
matic callback (➔ page 45).