Siemens 2060isdn User Manual

Page 13

Installation

I_KAP01.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

3. Then back to the mobile unit

●

You can register your comfort mobile unit at a maxi-

mum of six base stations.

●

You can register a maximum of 8 mobile units at a

base station. If you start the registration procedure

and 8 mobile units are already registered, the mes-

sage “No free internal No.” appears in the display

when you enter the system code.

●

If is advisable to have base-station number display ac-

tivated if you have your mobile unit registered at more

than one base station.

System code

As described in the instructions for the procedures in-

volved, you have to enter the four-digit system code in or-

der to initialize your base station or change settings. The

default system code is “0000”. You have to use this default

system code when you register the first mobile unit.

There is a separate mobile-unit PIN which you use to lock

a particular mobile unit.

1 … 8 Key in the internal number you want to assign to the mo-

bile unit.

Confirm your choice of internal number. This concludes

the registration procedure and a message to this effect

appears in the display, for example “Unit registered with

internal No. 2”.

It is advisable to change the system code after

you register the first mobile unit (see “Entering

the PIN“ in the User Guide for the mobile unit

and page 22). The system code “locks” your

system to prevent unauthorized access. No fur-

ther mobile units can be registered or changes

made to system settings without this system

code.

t means: browse withu

and press

to confirm

NEXT