Siemens 2060isdn User Manual

Page 50

Locks

I_KAP03.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

This is the menu for defining lock numbers. The options at

your disposal are as follows:

Delete all lock numbers

Use this function to delete all lock numbers at once.

Meaning: see footnote

All lock numbers for all internal users are deleted at once.

The “Entries deleted” messages appears for 2 seconds

by way of confirmation.

Blocking unwanted calls

You can enter up to three phone numbers, each up to 16

digits long, to determine which users can reach you. Calls

from users with phone numbers other than these num-

bers are not put through to you.

A message indicating that this lock is activated appears on

the mobile-unit display.

This lock can be circumvented if the calling party has sup-

pressed transmission of the phone number to you (Glos-

sary, ➔ page 98), or if the call is from a non-ISDN user.

It is advisable to activate phone number display as a better

way of checking the origin of incoming calls.

t Lock int2

Select the internal user (for example “Lock int2”) to

whom the function will apply.

t Lock on

Activate/deactivate call barring by lock numbers.
When you select “Lock on”, the message “call barr. Nos.

for int2 activated” is displayed briefly.

t Lock No. list

Check/change lock numbers.
Once you have selected a lock number you can check or

change it.

t New entry

Add a new lock number.

t Delete lock No.

Delete individual lock numbers. Select an entry: the lock

number you select is deleted when you confirm your

choice.

The comfort mobile unit is idle. You will be prompted to

enter the system code in the course of this procedure

(default code: “0000”).

.t Service

t System settings t Call barring

t Delete all

t means: browse withu

and

press x

to confirm

NEXT