1q vlan port configuration, 1q vlan port configuration -62 – SMC Networks TigerStack 100 1000BASE-X User Manual
Page 80
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-62
802.1Q VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.
802.1Q VLAN Port Configuration : Unit 1 Port
1 - 12
===============================
Port
PVID
Acceptable
Ingress
GVRP
GVRP Failed
GVRP Last
Frame Type
Filtering
Status
Registrations
PDU Origin
---------------------------------------------------------------------
1
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
2
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
3
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
4
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
5
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
6
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
7
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
8
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
9
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
10
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
11
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
12
1
All
FALSE
DISABLED
0
00-00-00-00-00-00
Use
Parameter
Description
PVID
The VLAN ID assigned to untagged frames received
on this port.
Acceptable
Frame Type*
This switch accepts “All” frame types, including VLAN
tagged or VLAN untagged frames. Note that all VLAN
untagged frames received on this port are assigned to
the PVID for this port.
Ingress Filtering*
If set to “True,” incoming frames for VLANs which do
not include this ingress port in their member set will be
discarded at the ingress port.
* These controls do not affect VLAN independent BPDU frames, such as GVRP
or STP. However, they do affect VLAN dependent BPDU frames, such as
GMRP.