Configuring sta for ports, Configuring sta for ports -37 – SMC Networks TigerStack 100 1000BASE-X User Manual
Page 55
C
ONFIGURING
THE
S
WITCH
2-37
Configuring STA for Ports
The following figure and table describe port STA configuration.
Spanning Tree Port Configuration : Unit 1 Port
1 - 12
================================
Fast forwarding on all ports : [Enable]
[Disable]
Port
Type
Priority
Cost
FastForwarding
-----------------------------------------------------
1
100FX
128
19
ENABLED
2
100FX
128
19
ENABLED
3
100FX
128
19
ENABLED
4
100FX
128
19
ENABLED
5
100FX
128
19
ENABLED
6
100FX
128
19
ENABLED
7
100FX
128
19
ENABLED
8
100FX
128
19
ENABLED
9
100FX
128
19
ENABLED
10
100FX
128
19
ENABLED
11
100FX
128
19
ENABLED
12
100FX
128
19
ENABLED
other keys to make changes.
Parameter
Default
Description
Fast forwarding
on all ports
Enabled
See “FastForwarding” in this table.
Type
Shows port type as:
100FX :
100BASE-FX
1000SX :
1000BASE-SX
1000LX
: 1000BASE-LX
1000T
: 1000BASE-T
Priority
128
Defines the priority for the use of a port in the STA
algorithm. If the path cost for all ports on a switch are
the same, the port with the highest priority (i.e., lowest
value) will be configured as an active link in the
Spanning Tree. Where more than one port is assigned
the highest priority, the port with lowest numeric
identifier will be enabled. The range is 0 - 255.