SMC Networks TigerStack 100 1000BASE-X User Manual
Page 64
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-46
You can use the Port Trunking Configuration screen set up port trunks as
shown below:
Port Trunking Configuration
===========================
Trunk ID
Status
Member List
1
2
3
4
---------
--------
-----------
-----------
-----------
-----------
--
--------
Unit : -
Unit : -
Unit : -
Unit : -
Port : --
Port : --
Port : --
Port : --
--
--------
Unit : -
Unit : -
Unit : -
Unit : -
Port : --
Port : --
Port : --
Port : --
--
--------
Unit : -
Unit : -
Unit : -
Unit : -
Port : --
Port : --
Port : --
Port : --
Trunk ID : 1
Trunk ID : 1
Member Unit : 1
Member Port : 1
[Show]
[More]
[Enable]
[Disable]
[Add]
[Delete]
Use
Parameter
Description
Trunk ID
Configure up to five trunks per switch.
Status
Shows if the selected trunk is enabled or disabled.
Unit
Specifies a switch unit in the stack (1~4).
Port
Select from 2 ~ 4 ports per trunk.
[Show]
Displays trunk settings, where the first trunk listed is
specified by “Trunk ID.”
[More]
Scrolls through the list of configured trunks.
[Enable] [Disable]
Enables/disables the selected trunk.
[Add] [Delete]
Adds/deletes the port specified by
Trunk ID / Member Unit / Member Port.