SMC Networks TigerStack 100 1000BASE-X - Manual (Page 68)

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-50
Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable
broadcast storm control for any port on the switch, as shown below.
Broadcast Storm Control Configuration : Unit 1 Port 1 - 12
======================================
Broadcast control on all ports : [Enable] [Disable]
Port Threshold Broadcast Control
-------------------------------------------------------
1 500 ENABLED
2 500 ENABLED
3 500 ENABLED
4 500 ENABLED
5 500 ENABLED
6 500 ENABLED
7 500 ENABLED
8 500 ENABLED
9 500 ENABLED
10 500 ENABLED
11 500 ENABLED
12 500 ENABLED
Use or arrow keys to move. to select
Parameter Description
Broadcast control on all
ports
Allows you to enable/disable broadcast storm control for
all ports on the switch.
Threshold The packet-per-second threshold at which broadcast
control will be employed on the port.
(Default is 500 pps.)
Broadcast Control Enables/disables broadcast control for the port. When
enabled, the switch will employ a broadcast- control
mechanism if the packet-per-second threshold is
exceeded. This mechanism limits the amount of
broadcasts passed by the port to half of the received
packet-per-second count. The control mechanism
remains in effect until the number of received broadcasts
falls back below the packet-per-second threshold.
(Default is Enabled.)