SMC Networks TigerStack 100 1000BASE-X - Manual (Page 146)

W
EB
-B
ASED
M
ANAGEMENT
3-52
Use the Port Trunking Configuration screen to set up port trunks as
shown below:
Parameter Description
Trunk A unique identifier for this trunk. You can configure up to
five trunks per switch.
Status Enables or disables the displayed trunk.
Member List You can create up to 12 trunks for the entire stack by
specifying the trunk identifier, switch unit and port number,
and then pressing the “Add” button. Each trunk can contain
from 2 to 4 ports.