SMC Networks TigerStack 100 1000BASE-X - Manual (Page 23)

M
AIN
M
ENU
2-5
BStorm Control
Configuration
Allows you to enable/disable broadcast storm
control on a per-port basis and set the
packet-per-second threshold.
Extended Bridge
Configuration
Displays/configures extended bridge capabilities
provided by this switch.
802.1P Configuration Configures default port priorities and queue
assignments.
802.1Q VLAN
Base Information
Displays basic VLAN information, such as VLAN
version number and maximum VLANs supported.
802.1Q VLAN Current
Table Information
Displays VLAN groups and port members.
802.1Q VLAN Static Table
Configuration
Configures VLAN groups via static assignments,
including setting port members, or restricting ports
from being dynamically added to a port by the
GVRP protocol.
802.1Q VLAN
Port Configuration
Displays/configures port-specific VLAN settings,
including PVID, ingress filtering, and GVRP.
Port Security Configuration Allows you to enable and configure port security for
the switch.
Port GARP Configuration* Configures settings used in multicast filtering.
Port GMRP Configuration* Configures GMRP multicast filtering.
Network Monitor Menu
Port Statistics Displays statistics on network traffic passing
through the selected port.
RMON Statistics Displays detailed statistical information for the
selected port such as packet type and frame size
counters.
Unicast Address Table Provides full listing for unicast addresses, as well as
search and clear functions.
Multicast Address
Registration Table*
Provides full listing for multicast addresses, as well
as search and clear functions.
IP Multicast Registration
Table
Displays all the multicast groups active on this
switch, including multicast IP addresses and
corresponding VLAN IDs.
* Not implemented in this firmware release.
Menu Description