SMC Networks TigerStack 100 1000BASE-X User Manual
Page 78
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-60
Parameter
Description
VID
The ID for the VLAN currently displayed.
Range: 1-2048
VLAN Name
A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Status
Sets the current editing status for this VLAN as: Not in
Service, Destroy or Active.
Unit
Stack unit.
Egress Ports
Set the entry for any port in this field to “1” to add it to
the displayed VLAN, or “0” to remove it from the
VLAN.
Forbidden Egress Ports
Prevents a port from being automatically added to this
VLAN via GVRP. Note that GVRP is not supported in
the current firmware release.
Untagged Ports
You can add a port to the displayed VLAN as an
untagged port by setting this field to “1” or as a tagged
port by setting it to “0.” This field is only enabled if the
corresponding port has been added to the displayed
VLAN as an “Egress Port.”
[Show]
Displays settings for the specified VLAN.
[More]
Displays consecutively numbered VLANs.
[New]
Sets up the screen for configuring a new VLAN.