SMC Networks TigerStack 100 1000BASE-X - Manual (Page 140)

W
EB
-B
ASED
M
ANAGEMENT
3-46
Port Configuration
Use the Port Configuration menu to configure any port on the switch.
Parameter Default Description
Flow Control
Mode
(on all ports)
Disabled See “Flow Control Status” in this table.
Admin Status Enable Allows you to disable a port due to abnormal
behavior, and then re-enable it after the problem
has been resolved. You may also disable a port
for security reasons.
Duplex Status 100M
Full-Duplex
Used to set the current port speed and duplex
mode.
The MT-RJ ports have a default setting of
100 Mbps full duplex. Auto-negotiation is the
default setting for 1000BASE-T, 1000BASE-SX
and 1000BASE-LX; but is not available for
100BASE-FX.