SMC Networks TigerStack 100 1000BASE-X - Manual (Page 129)

C
ONFIGURING
V
IRTUAL
LAN
S
3-35
VLAN Current Table
This screen shows the current port members of each VLAN and whether
or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However, if
you just want to create a small port-based VLAN for one or two switches,
you can assign ports to the same untagged VLAN. The current
configuration is shown in the following screen.
Parameter Description
VLAN Entry Delete
Count
The number of times a VLAN entry has been deleted from
this table.
VLAN ID The ID for the VLAN currently displayed.
Up Time
at Creation
The value of System Up Time (sysUpTime) when this
VLAN was created.
Status Shows how this VLAN was added to the switch.
Dynamic GVRP: Automatically learned via GVRP.
Permanent: Added as a static entry.
(Note that GVRP is not supported by the current firmware
version.)