SMC Networks TigerStack 100 1000BASE-X - Manual (Page 71)

C
ONFIGURING THE
S
WITCH
2-53
Configuring Traffic Classes
IEEE 802.1p defines up to 8 separate traffic classes. This switch supports
Quality of Service (QoS) by using two priority queues, with Weighted Fair
Queuing for each port. You can use the 802.1P Configuration menu to
configure the default priority for each port, or to display the mapping for
the traffic classes as described in the following sections. Also, refer to
“Class-of-Service (CoS) Support” on page 4-7.
802.1P Configuration : Selection Menu
====================
802.1P Port Priority Configuration ...
802.1P Port Traffic Class Information ...
Use or arrows keys to move. to select.