SMC Networks TigerStack 100 1000BASE-X - Manual (Page 35)

M
ANAGEMENT
S
ETUP
M
ENU
2-17
Configuring the Serial Port
You can access the on-board configuration program by attaching a VT100
compatible device to the switch’s serial port. (For more information on
connecting to this port, see “Required Connections” on page 1-2.) The
communication parameters for this port can be accessed from the Serial
Port Configuration screen shown below and described in the following
table.
Serial Port Configuration
=========================
Management Mode : CONSOLE MODE
Baud rate : 19200
Data bits : 8
Stop bits : 1
Parity : NONE
Time-Out (in minutes) : 10
Auto Refresh (in seconds) : 5
Use or arrow keys to move. to scroll options
Parameter Default Description
Management
Mode
Console
Mode
Indicates that the console port settings are for
direct console connection.
Baud rate 19200 The rate at which data is sent between devices.
Options : 2400, 4800, 9600, 19200 and auto
detection.
Note that when Auto is selected, you need to first
press the Enter key once to set the data rate and
initialize the connection.
Data bits 8 bits Sets the data bits of the RS-232 port.
Options : 7, 8
Stop bits 1 bit Sets the stop bits of the RS-232 port.
Options : 1, 2