SMC Networks TigerStack 100 1000BASE-X - Manual (Page 46)

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-28
Configuring the Switch
The Device Control menu is used to control a broad range of functions,
including port configuration, Spanning Tree, port mirroring, multicast
filtering, and Virtual LANs. Each of the setup screens provided by these
configuration menus is described in the following sections.
Device Control Menu
===================
Port Configuration ... Extended Bridge Configuration ...
Port Information ... 802.1P Configuration ...
Spanning Tree Configuration ... 802.1Q VLAN Base Information ...
Spanning Tree Information ... 802.1Q VLAN Current Table Information ...
Mirror Port Configuration ... 802.1Q VLAN Static Table Configuration ...
Port Trunking Configuration ... 802.1Q VLAN Port Configuration ...
IGMP Configuration ... Port Security Configuration ...
BStorm Control Configuration ... Port GARP Configuration ...
Port GMRP Configuration ...
Use or arrow keys to move. to select.
Menu Description
Port Configuration Sets communication parameters for ports.
Port Information Displays current port settings and port status.
Spanning Tree
Configuration
Configures the switch and its ports to participate in a
local Spanning Tree.
Spanning Tree
Information
Displays the current Spanning Tree configuration for
the switch and its ports.
Mirror Port Configuration Sets the source and target ports for mirroring.
Port Trunking
Configuration
Specifies ports to group into aggregate trunks.
IGMP Configuration Configures IGMP multicast filtering.
BStorm Control
Configuration
Allows you to enable/disable broadcast storm control
on a per-port basis and set the packet-per-second
threshold.