Sanyo PJLINK PLC-WM4500 - Manual (Page 78)

7
Check the indicators for the projector condition.
Indicators
Projector Condition
POWER
green
LAMP
red
WARNING
TEMP.
red
WARNING
FILTER
orange
P-MANAGEMENT
STAND-BY
blue
LAMP
REPLACE
orange
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the projection
lamp is being cooled down. The projector cannot be
turned on until cooling is completed and the POWER
indicator lights green.
The projection lamp is being cooled down in the Power
management mode.
The projector is in the Power management mode.
Press the ON/STAND-BY button to turn on the
projector.
The projector is operating normally .
• • • on
• • • off
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • dim
• • • blinking slow
(approx. 2 seconds ON, 2
seconds OFF)
⁄
⁄
⁄
Appendix
• • • on (blue) ❊
❊ • • • blinking at the normal rate (blue
and dim red) (approx. 1 second
ON, 1 second OFF)
❊
• • • blinking fast (blue and dim red)
(approx. 0.5 seconds ON, 0.5
seconds OFF)
• • • blinking fast
(approx. 0.5 seconds ON, 0.5
seconds OFF)
• • • on (red) ❖
❖ • • • dim (red)
❖
❖
❖
⁄ ❖
⁄
⁄
⁄
⁄
⁄
⁄
• • • Differ according to conditions. ⁄
Indicators and Projector Condition
❖ ❊