Sanyo PJLINK PLC-WM4500 - Manual (Page 70)

70
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch the
surface of the lens.
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of
mild detergent and finish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface
of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect from dust and scratches.
Maintenance and Care
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire hazard
may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely
high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the
flammable air spray but also by the cold air.
CAUTION