Sanyo PJLINK PLC-WM4500 - Manual (Page 64)

64
This function returns all setting values except for User logo,
PIN code lock, Logo PIN code lock, Lamp counter, and Filter
counter to the factory default settings.
Various test pattern are available for use when setting up the
projector.
Filter warning icon appears on the screen at a
set time.
Fig .1 Filter warning icon
P Note:
• Fig.1 appears at turning on and selecting input
source.
• Fig.1 will not appear when the Display function is
set to Off (p.52), during “Freeze” (p.30) or No show
(p 29).
Setting
This function is used to set a frequency for the filter cartridge
replacement.
Use the Point pq buttons to select Filter counter and then press
the Point u or the SELECT button to access the submenu items.
Filter counter...... Show the total accumulated time of the filter
cartridge.
Timer ................ To set a timer, when the projector reaches
the time, the Filter warning icon (Fig. 1)
appears on the screen and the total
accumulated time turns red, indicating that
the filter cartridge replacement is necessary.
Filter counter reset...When replacing the Filter cartridge, reset the
Filter counter (p.67).
Filter counter
Press the SELECT button to select Timer and then use
the Point
pq buttons to set the timer. Select from (Off/
600H/900H/100H/1500H/100H/000H) depending on
the use environment.
Filter counter
Test pattern
Factory default