Sanyo 710-00792-1 - Manual

Please read all instructions below and install this system properly.
Please read "SAFETY PRECAUTIONS" and "IMPORTANT SAFETY INSTRUCTIONS" on
OWNER'S MANUAL to install and place this system.
This system is supplied in 3 packages and they need to be installed. Please make sure all the
parts are included. If any part is missing, or if you have questions, contact a sales dealer.
CAUTION
WHEN INSTALLING THIS SYSTEM, BE CAREFUL NOT TO DAMAGE THE PROJECTION
SCREEN. AND NEVER TOUCH THE SURFACE OF THE PROJECTION SCREEN AND
THE PROJECTION MIRROR DIRECTLY. THEY MAY EFFECT THE PROJECTION IMAGE
QUALITY.
BE CAREFUL NOT TO DROP ANY PART OR TOOL LIKE SCREW INTO THE SYSTEM. IF
IT SHOULD, CONTACT A SERVICE.
EXCEPT WHEN ADJUSTING THE PROJECTION MIRROR, NEVER TURN THE SYSTEM
ON UNTIL THE INSTALLATION IS FINISHED. IT MAY CAUSE ELECTRICAL SHOCK OR
FIRE HAZARD.
REQUEST A SALES DEALER FOR INSTALLATION
Rear Projection Display
Installation Manual
Install the system following steps.
1AA6P1P1756-- (M8EA)
1. CHECK CONTENTS IN PACKAGES
2. ASSEMBLE BOTTOM CABINET
3. JOINT TOP AND BOTTOM CABINETS
4. SETUP PROJECTION MIRROR
5. ADJUST PROJECTION MIRROR
THIS SYSTEM MUST BE INSTALLED BY 2 OR MORE PEOPLE
6. ASSEMBLE STORAGE SPACES
7. LOCK CABINET
710-00792-1