Sanyo PJLINK PLC-WM4500 - Manual (Page 67)

67
Filter counter
Maintenance and Care
Be sure to reset the Filter counter after cleaning or replacing the
filter.
Press the MENU button to display the On-Screen Menu. Use
the Point
pq buttons to select Setting and then press the
Point u or the SELECT button.
Use the Point pq buttons to select Filter counter and then
press the SELECT button. Use the Point pq buttons to
select Filter counter Reset and then press the SELECT
button. Filter counter Reset? appears. Select yes to
continue.
1
Filter counter Reset?
appears.
Select yes, then another
confirmation box appears.
Select yes again to reset
the Filter counter.
Another confirmation dialog box appears, select yes to reset
the Filter counter.
Resetting the Filter Counter