Sanyo PJLINK PLC-WM4500 - Manual (Page 43)

4
Computer Input
Adjust the screen scale and position manually with this function.
Press the Point
u button or the SELECT button at Custom adj .
and Custom adj . is displayed on the screen, you can use the Point
pq buttons to choose the item you want to adjust.
Scale H/V ............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the screen
scale is automatically modified based on the
aspect ratio.
Position H/V ........ Adjust the Horizontal/Vertical screen position.
Common .............. Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the scale,
press the SELECT button at yes. When
Custom is selected, the saved scale is used.
Reset ................... Reset the all adjusted values. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the SELECT
button at yes.
P Note:
• When no signal is detected, Normal is set automatically
and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is
limited depending on the input signal.
Custom adj . Custom adj .
Select Digital zoom +. The On-Screen Menu disappears and D . zoom
+ appears. Press the SELECT button to expand the image size. Use
the Point
pqt u buttons to pan the image. The Panning function
can work only when the image is larger than the screen size.
You can also enter the Digital zoom + mode by pressing the D.ZOOM
button on the remote control.
You can also enter the Digital zoom - mode by pressing the D.ZOOM
button on the remote control.
Select Digital zoom – . The On-Screen Menu disappears and D . zoom
– appears. Press the SELECT button to compress image size.
The projected image can be also compressed by pressing the D.ZOOM
button on the remote control.
To return to the previous screen size, select a screen size from the
Screen Size Adjustment Menu or select an input source from the
Input Source Selection Menu (see pages 33-35) again or adjust
the screen size with the D.ZOOM button.
P Note:
• The panning function may not operate properly if the
stored Mode in the PC adjust Menu is used (p.39).
• The minimum compression ratio is limited depending
on the input signal, when the Keystone function is
working or when the custom is selected for the screen
size.
• True and Digital zoom +/– cannot be selected when
480i, 575i, 480p or 575p is selected in the PC System
Menu (p.36).
• Digital zoom +/- cannot be selected when True is
selected.
• Digital zoom – cannot be operated when Custom is
selected.
Digital zoom +
Digital zoom -