Sanyo PJLINK PLC-WM4500 - Manual (Page 28)

VOLUME + button
VOLUME – button
MUTE (Point q ) button
Side Control
Basic Operation
1 Press the MENU button to display the On-Screen Menu. Use
the Point
pq buttons to select Sound. Press the Point u or
the SELECT button to access the submenu items.
Press the VOLUME+/– buttons on the side control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Press the MUTE (Point q) button on the remote control to select
On to temporarily turn off the sound. To turn the sound back on,
press the MUTE (Point
q) button again to select Off or press the
VOLUME +/– buttons. The Mute function is also effective for the
AUDIO OUT jack.
Press the SELECT button to switch the mute function On/Off.
When the sound is turned off, On is displayed. Press the VOLUME
+/– buttons again to turn the sound back on.
Use the Point pq buttons to select the desired submenu item
and press the SELECT button to access the selected item.
Volume
Volume
Mute
Press the Point u button to turn up the volume; press the Point t
button to turn down the volume.
Mute
Sound Menu
Volume Dialog Box
Approximate level
of the volume.
Press the Point q button to set the
Mute function On or Off. The dialog box
disappears after 4 seconds.
Press the Point pq buttons to switch the Built-in SP function On/
Off. When the Built-in SP sound is turned off, Off is displayed.
Built-in SP
Remote Control
VOLUME +/– buttons
Sound Adjustment
Direct Operation
Menu Operation