Sanyo PJLINK PLC-WM4500 - Manual (Page 62)

6
Setting
Use the Point pq buttons to select Off, On1 or On. Press the
SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
Use the Point pq buttons to enter a number. Press the Point u
button to fix the number and move the red frame pointer to the
next box. The number changes to ⁄. If you fixed an incorrect
number, use the Point
t button to move the pointer to the number
you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set.
Press the SELECT button so that you can start to operate the
projector.
If you entered an incorrect PIN code, PIN code and the number
(⁄⁄⁄⁄) will turn red for a moment. Enter the correct PIN code
all over again.
Enter a PIN code
The PIN code can be changed to your desired four-digit number.
Press the Point
q button to select PIN code change and press
the SELECT button. The Current PIN code dialog box appears.
Use the Point
pq buttons to set the current PIN code. The
New PIN code dialog box appears. Set a new PIN code, the
confirmation box appears, and choose Yes to set the new PIN
code.
Change the PIN code
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO .
MEMO ON PAGE 6, AND KEEP IT SECURELy . IF yOU
FORGET yOUR PIN CODE, THE PROjECTOR CAN NO
LONGER BE STARTED .
PIN code change