beautypg.com

Air circulation, Safety instructions air circulation – Sanyo PJLINK PLC-WM4500 User Manual

Page 6

background image

6

Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch peripheral parts of the exhaust vent,

especially screws and metallic parts. These areas will
become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause
fire hazard by heat.

Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.

Exhaust Vent
(Hot air exhaust)

Air Intake Vent

Air flow

The projector uses a lamp which generates significant
heat. The cooling fans and air vents are provided to
dissipate the heat by drawing air into the housing and the
filter is located in the intake vents to prevent dust from
getting inside of the projector.

In order to care for the projector appropriately, regular
cleaning is required. Remove any dirt or dust that has
accumulated on the projector.

If the projector reaches a time set in the timer setting, a
Filter warning icon (Fig. 1) appears on the screen and
WARNING FILTER indicator on the top panel lights up (see
below), indicating that the filter replacement is necessary.

Blocking the air vents and leaving the projector uncleaned
for a long time may not only damage the projector and may
require costly repairs but may also cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” on
page 64 and “Maintenance and Care” on pages 65-67.

Damages to the projector caused by using an
uncleaned filter or improper maintenance will void the
warranty on the projector .

IMPORTANT!

Filter Maintenance!!

Top Panel

WARNING FILTER
indicator

Fig . 1 Filter warning icon

Safety Instructions

Air Circulation