Sanyo PJLINK PLC-WM4500 - Manual (Page 63)

6
Setting
When you want to make a digital processing of a projected
image faster, set this function.
Use the Point
pq buttons to select On or Off.
Video delay control
Closed caption
Closed caption is a printed version of the program sound
or other information displayed on the screen. If the input
signal contains closed caption, you can turn on the feature
and switch the channels. Press the Point
ed buttons to
select Off, CC1, CC, CC or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
✔
Note:
The Closed caption is available only under the situation
below..
•When the input signal is NTSC of composite and
•When the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on Auto.
•The system must be set on NTSC or Auto in Video
System Selection. (P.39)
•The item of Closed caption is displayed in gray while
it is not available.
•The Closed caption is unavailable when On-Screen
menu and P-Timer are displayed.
Press the Point ed buttons to select Off, CC1, CC,
CC or CC4, and then Press SELECT button.
P Note:
Noise reduction and Progressive can not be selected when Video
delay control is set to On.
Closed caption