Sanyo PJLINK PLC-WM4500 - Manual (Page 20)

0
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Cables used for connection
( ⁄ = Cables not supplied with this projector.)
• Video cable (RCA x 1 or RCA x 3)
⁄
• BNC cable (BNC x 1 or BNC x 3)
⁄
• S-video cable ⁄
• Scart-VGA cable
⁄
• HDMI cable
⁄
Installation
Input Terminal Monitor Out Cable
Input 1
D-sub15
RGB (PC analog) YES
RGB (SCART) NO
HDMI HDMI NO
Input 2 5 BNC
RGB YES
Video YES ⁄
Y, Pb/Cb, Pr/Cr YES ⁄
Input 3
RCA Y, Pb/Cb, Pr/Cr YES ⁄
S-video S-video NO
Video Video YES ⁄
Analog Out Signal Table
⁄ A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is
necessary.
Connecting to Video Equipment (Video, S-video, HDMI)
RGB Scart
21-pin Output
S-video
cable
S-video
Output
Composite
Video
Y - Pb/Cb - Pr/Cr
BNC
cable
Component
Video Output
Composite
Video
Component
Video Output
(Y, Pb/Cb, Cr/Pr)
HDMI Output
RCA
cable
HDMI
cable
Scart-
VGA
cable
Video HDMI ANALOG IN ANALOG OUT S-VIDEO
Refer to the
Analog Out
Signal Table
(above).
Video Y - Pb/Cb - Pr/Cr