Sharp SF-1120 - Manual (Page 9)

4. Optional specifications
(1) Automatic document feeder (ADF)
Original set direction Face up
Original set position Center reference
Original transport system Belt (half size) system
Original feed sequence Bottom taking (Face up exit)
Original size A3 ∼ A5/11" Ч 17" ∼ 8 1/2" Ч 5 1/2"
Original change speed
(S
→
S)
20 sheets/min
Original weight 35 ∼ 128g/m
2
(50 ∼ 128g/m 2 for EX)
Original set quantity 50 sheets, 35 ~ 80 g/cm
2
,
80 ~ 128 g/m
2
thickness max. 6.5 mm
Original stop system Position control system
Dimensions 571 (W) × 521 (D) × 110 (H) (mm)
(Height: excluding the tray)
Weight About 11.5kg
Power source Supplied from the copier’s power section.
Power consumption 65W
Functions
Original sensing on
the tray YES (Scanning read for uncertain size
originals.)
Sensing size Inch series: 11"
Ч
17", 8 1/2"
Ч
14", 8 1/2"
Ч
11", 8 1/2" Ч 11"R, 8 1/2" × 5 1/2"
AB series: A3, B4, A4, A4R, A5
Original mixture Allowed (However, no linkage with the AMS)
Original reverse NO
(2) Reverse automatic document feeder (RADF)
Original set direction Face up
Original set position Center reference
Original transport system Belt system
Original feed sequence Bottom taking (Face up exit)
Original size A3
∼
A5, 11"
Ч
17"
∼
8 1/2"
Ч
5 1/2"
Original replacement
speed (S
→ S)
20 sheets/min
Original weight 35
∼
128g/m
2
(50
∼
128g/m
2
for EX)
Original set capacity 50 sheets, 35 ∼ 80g/m 2
80 ∼ 128g/m 2 : thickness Max. 6.5mm
Original stop system Position control
Dimensions 592 (W)
×
521 (D)
×
110 (H) mm
(Height; excluding the tray)
Weight About 12.5kg
Power source Supplied from the copier (equipped
with the power source).
Power consumption 73W
Functions
Original detection on the
tray Available (For originals of indefinite
sizes, scanning is made.)
Detection size Japan: A3, B4, A4, A4R, B6, B6R
Inch series: 11"
Ч 17", 8 1/2" Ч 14", 8
1/2" Ч 11", 8 1/2" Ч 11"R, 8 1/2" × 5 1/2"
E × AB series: A3, B4, A4, A4R, A5
Original mixture Allowed (However, no linkage with the
AMS)
Original reverse Allowed
Display section
1 Original feed display The ADF shows the operation
allowable state. When an original is
set, the display lights up.
2 Original remaining
display When the automatic document feeder
is used as the original cover, the LED
lights up simultaneously when the last
exposure is completed. When the
transport cover is opened, the LED
goes off.
SDF mode Selection between the SDF mode and
the ADF mode is possible. (Selected
by the user program.)
(3) 10-bin sorter
Type Copier installation type/Hanging type
Distribution system Bin shift by lead screw
No. of bins 10 bins (The top bin is used also for
non-sort.)
Capacity 30 sheets/bin (L4/letter size), 100
sheets for the top bin only.
Sorting 30 sheets (A4/letter)
15 sheets (B4/legal)
15 sheets (A3/W letter)
Grouping 20 sheets (A4/letter)
15 sheets (B4/legal)
15 sheets (A3/W letter)
Paper size (Non-sort) A3
∼
A6 (Postcard)R/11"
Ч
17"
∼
8 1/2" Ч 5 1/2"
(Sort/group) A3 ∼ A5/11" Ч 17" ∼ 8 1/2" Ч 11"
Process capacity 20 sheets/min
Paper transport Center reference
Paper reception Face up
Paper weight (Non-sort) 52 ∼ 128g/m
2
(14 ∼ 34lbs)
(Sort/group) 56
∼
80g/m
2
(15
∼
21lbs)
Dimensions 335 (W)
×
493 (D)
×
298 (H)
(Width: Including the tray.)
Weight 7kg
Power source Supplied from the copier. DC24V (1.2A)
Power consumption Max. 30W
2 – 4