Samsung Evergreen a667 - Manual (Page 65)

Changing Your Settings 60
2. Press twice return to the previous Settings page.
Adjusting the Voice Call Settings
1. Select Voice Call and choose from the following options:
• Call Forwarding: incoming calls are re-routed to a secondary
number that you specify. Select the condition for the call forward
action:
– Always activates an automatic forward of all incoming calls regardless
of condition.
– Busy activates an forward function only when your number is currently
in use and the caller receives a busy signal.
– No reply activates an automatic forward of all incoming calls after a
preset amount of time (5 seconds - 30 seconds).
– Unreachable activates an automatic forward of all incoming calls only
when you can not be reached and your phone status is set to
unreachable.
– Cancel all cancels all call forwarding functions.
• Call Waiting: this network service informs you when someone is
trying to reach you during another call. You can specify individual
call waiting options for voice calls and/or data calls.
– Press Options and select one of the following options: Activate,
Deactivate, or Check status (checks the status of this service on your
account).
• Auto Redial: the phone automatically redials the last active number
if the call was either cut off or you were unable to connect.
– Press either On or Off to activate/deactivate the function.
– Press Save to store the new setting.
• Noise Suppression: Your phone is equipped with an advanced
voice processing chip that delivers clear mobile calls by
suppressing background noise, intermittent sounds (like a siren or
nearby conversation), and echoes, allowing you to hear and be
heard nearly anywhere. Select On or Off.
2. Press twice return to the previous Phone settings
page.
Connectivity
You can edit several of the communication/connection
parameters on this phone.
ᮣ In Idle mode, select Menu ➔ Settings ➔ Connectivity.
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection. Unlike infrared, you
don't need to line up the devices to beam information with
Bluetooth. If the devices are within connectivity range of one
another, you can exchange information between them, even if
they are located in different rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.