Symbol Technologies VC5090 - Manual (Page 39)

Installation 2 - 15
Installing the Optional Keyboard
The keyboard kit contains the following items:
•
keyboard
•
two keyboard brackets
•
four cap screws with captive washers
•
two locking knobs
•
four flat and lock washers.
1.
Attach the keyboard brackets to both sides of the VC5090, using the cap screws with captive washers.
Figure 2-15 Attaching the Brackets to the VC5090
2.
Torque the screws to 230 kgf/cm (200 in-lbs).
3.
Squeeze the quick release tabs on the keyboard and align the keyboard with the brackets.
NOTE
The optional keyboard is only available on the full-screen configuration.
Left Hand
Bracket
Cap Screws with
Captive Washers