Symbol Technologies VC5090 - Manual (Page 111)

Wireless Applications 4 - 35
Figure 4-46 System Options Dialog Box
Change Password
Use
Change Password
to require a password before editing a profile. This allows pre-configuring profiles and
prevents users from changing the network settings. The user can use this feature to protect settings from a
guest user. By default, the password is not set.
Figure 4-47 Change Password Window
To create a password for the first time, leave the Current: text box empty and enter the new password in the
New:
and
Confirm:
text boxes. Tap
Save
.
To change an existing password, enter the current password in the
Current:
text box and enter the new
password in the
New:
and
Confirm:
text boxes. Tap
Save
.
To delete the password, enter the current password in the
Current:
text box and leave the
New:
and
Confirm:
text boxes empty. Tap
Save .
Table 4-26 System Options
Field Description
Profile Roaming Configures the vehicle computer to roam to the next available WLAN profile when it
moves out of range of the current WLAN profile.
Enable IP Mgmt Enables the Wireless Companion Services to handle IP address management. The
Wireless Companion Service configures the IP based on what is configured in the
network profile. Deselect this to manually configure the IP in the standard Windows IP
window. Enabled by default.
Auto Time Config Enables automatic update of the system time. Network association updates the device
time based on the time set in the AP. This proprietary feature is only supported with
Symbol infrastructure. Enabled by default.
NOTE
Passwords are case sensitive and can not exceed 10 characters.