Symbol Technologies VC5090 - Manual (Page 176)

7 - 32 VC5090 Vehicle Computer Product Reference Guide
Figure 7-29 Misc (4) Tab
Table 7-11 Misc (4) Tab Descriptions
Field Description
Sched Mode Specifies whether (and how) the scheduled mode is enabled. If enabled, schedule mode
causes the AirBEAM synchronization process to occur periodically. The selections are:
Disable
- The schedule mode is disabled.
Fixed time
- The schedule mode is enabled. The AirBEAM synchronization will be launched
once per day at the time specified in the Sched Time setting. The synchronization will be
launched every day Sched Time minutes past midnight.
Fixed period
- The schedule mode is enabled. The AirBEAM synchronization will be
launched at a period by the Sched Time setting. The synchronization will be launched every
Sched Time minutes.
Sched Time This edit control specifies, in minutes, the period for the schedule mode. The Sched Mode
setting specifies how the Sched Time value is used.
Sched Load This drop-down menu specifies the load mode to be used for scheduled synchronization, if
enabled. The selections are:
Default
- Specifies that the load mode specified in the Auto-load setting is to be used for
scheduled synchronization sessions.
Interactive
- The Synchronization Dialog displays when a scheduled synchronization
session occurs. The user is required to press the OK button to dismiss the dialog.
Non-interactive
- The Synchronization Dialog displays when a scheduled synchronization
session occurs. The dialog is automatically dismissed when the synchronization is complete,
unless an error occurs. If an error occurs the user is required to press the OK button to
dismiss the dialog.
Background
- Nothing is displayed when the scheduled synchronization sessions occur.
Sched Prompt Specifies whether the AirBEAM client prompts the user when updates are available in
schedule mode. The settings are:
Disable
- Updated packages are automatically downloaded. The user is not prompted.
Alert
- Updated packages are not automatically downloaded. The user is prompted to warm
boot the device to initiate the package downloads.
Launch
- Updated packages are not automatically downloaded. The user is prompted to
start the package download. The user can defer the package download by responding no to
the prompt. The MAXNOPRESS registry setting can be used to limit the number of times the
user can defer the update.
Confirm
- Updated packages are not automatically downloaded. This value behaves the
same as the Launch value, except that the user is required to confirm an additional prompt
before the download starts.