SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 699)

M
ULTICAST
VLAN R
EGISTRATION
C
OMMANDS
33-21
The following displays information about the interfaces attached to the
MVR VLAN:
Console#show mvr interface
Port Type Status Immediate Leave
------- -------- ------------- ---------------
eth1/1 SOURCE ACTIVE/UP Disable
eth1/2 RECEIVER ACTIVE/UP Disable
eth1/5 RECEIVER INACTIVE/DOWN Disable
eth1/6 RECEIVER INACTIVE/DOWN Disable
eth1/7 RECEIVER INACTIVE/DOWN Disable
Console#
Table 33-7 show mvr interface - display description
Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for
source ports is “ACTIVE” if MVR is globally enabled on the
switch. MVR status for receiver ports is “ACTIVE” only if
there are subscribers receiving multicast traffic from one of
the MVR groups, or a multicast group has been statically
assigned to an interface.
Immediate Leave Shows if immediate leave is enabled or disabled.