Permit, deny (mac acl), Permit, deny (mac acl) -17, Mac acl – SMC Networks SMC TigerAccess SMC7824M/FSW User Manual

Page 531: Permit , deny (mac acl)

MAC ACL

23-17

Related Commands

permit, deny (23-17)
mac access-group (23-23)
show mac access-list (23-19)

permit, deny (MAC ACL)

This command adds a rule to a MAC ACL. The rule filters packets
matching a specified MAC source or destination address (i.e., physical layer
address), or Ethernet protocol type. Use the no form to remove a rule.

Syntax

[no] {permit | deny}

{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask] [ethertype protocol [protocol-bitmask]]

Note: The default is for Ethernet II packets.

[no] {permit | deny} tagged-eth2

[no] {permit | deny} untagged-eth2

{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[ethertype protocol [protocol-bitmask]]

[no] {permit | deny} tagged-802.3

{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask]

[no] {permit | deny} untagged-802.3

{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}