SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 534)

A
CCESS
C
ONTROL
L
IST
C
OMMANDS
23-20
access-list mac mask-precedence
This command changes to MAC Mask mode used to configure access
control masks. Use the no form to delete the mask table.
Syntax
[no] access-list ip mask-precedence {in | out}
• in – Ingress mask for ingress ACLs.
• out – Egress mask for egress ACLs.
Default Setting
Default system mask: Filter inbound packets according to specified
MAC ACLs.
Command Mode
Global Configuration
Command Usage
• You must configure a mask for an ACL rule before you can bind it to
a port or set the queue or frame priorities associated with the rule.
• A mask can only be used by all ingress ACLs or all egress ACLs.
• The precedence of the ACL rules applied to a packet is not determined
by order of the rules, but instead by the order of the masks; i.e., the
first mask that matches a rule will determine the rule that is applied to
a packet.
Example
Related Commands
mask (MAC ACL) (23-21)
mac access-group (23-23)
Console(config)#access-list mac mask-precedence in
Console(config-mac-mask-acl)#