SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 373)

S
YSTEM
S
TATUS
C
OMMANDS
19-3
System Status Commands
This section describes commands used to display system information.
show startup-config
This command displays the configuration file stored in non-volatile
memory that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration
Table 19-3 System Status Commands
Command Function Mode Page
show
startup-config Displays the contents of the configuration file
(stored in flash memory) that is used to start
up the system PE 19-3
show
running-config Displays the configuration data currently in
use PE 19-5
show system Displays system information NE,
PE 19-7
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet clients NE,
PE 19-8
show version Displays version information for the system NE,
PE
19-9