SMC Networks SMC TigerAccess SMC7824M/FSW - Manual (Page 358)

O
VERVIEW OF
C
OMMAND
L
INE
I
NTERFACE
17-10
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Table 17-2 Configuration Command Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line) 19-24
Access
Control
List access-list ip standard
access-list ip extended
access-list ip
mask-precedence
access-list mac
access-list mac
mask-precedence Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl) 23-3
23-3
23-8
23-16
23-20
Class
Map class map Console(config-cmap) 32-3
Interface interface {ethernet port |
port-channel id| vlan id}
Console(config-if) 24-2
MSTP spanning-tree
mst-configuration
Console(config-mstp) 29-10
Policy
Map policy map Console(config-pmap) 32-6
VLAN vlan database Console(config-vlan) 30-7
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#