To import cartridges using the cap, To import cartridges using the cap 5, Figure 4-4 – Sun Microsystems StreamLine SL8500 User Manual

Page 91

Automated Mode of Operation

96154 • Revision K

Chapter 4 Library Operation 51

When a CAP is in automated mode, it is unlocked unless it is currently being used to

import cartridges.

▼

To import cartridges using the CAP

1. Make sure that the CAP is unlocked (see

TABLE 1-4 on page 15

for a description of

CAP indicators).

2. Press the appropriate CAP Unlocked button (CAP A or CAP B) on the operator key

pad.

Note –

This action causes the CAP to rotate outward and present the magazines to load

cartridges.

3. With the CAP open, you may enter the cartridges into the magazines while the

magazines are in the CAP; or you may remove the magazines from the CAP, insert

cartridges into the magazines, and then replace the cartridge-filled magazines into

the CAP.

FIGURE 4-4

Placement of Cartridges with the Magazine Outside the CAP

1. CAP
2. CAP magazine removed

3. Magazine slots
4. Inserting cartridge with hub down

L203_474