Sun Microsystems StreamLine SL8500 - Manual (Page 67)

96154 • Revision K 27
CH APT ER
2
Configuration Information
This chapter describes how to verify the library and drives configuration entries for
operation.
Some configuration values, such as drive locations, capacity, and drive types are set
through an automatic configuration process that occurs during an IPL. However, before
the library is fully operational, some of the configuration values must be verified and
entered manually.
Typically, your service representative will configure your library during installation,
during firmware upgrade, or after drives are added. If you must change the library’s
configuration, you may enter the values through the Library Console. Library
configuration also includes setting up cleaning options using the library management
software.
Installing StreamLine Library Console
StreamLine Library Console is a software application that provides all of the functions
to test, monitor, and operate the library. You should activate the site user accounts
before accessing this application (see “Activating Password” on page 28 ).
StreamLine Library Console is contained on a compact disk (PN 3139995xx). The code
level of this application is also available on the Customer Resource Center web site at
http://www.support.storagetek.com.
▼
To install the StreamLine Library Console on your
PC
1. Run the Library Console installer from the CD or download the appropriate Library
Console code installer file from the customer resource center (CRC) at
http://www.support.storagetek.com to a folder on your PC.
Microsoft Windows installer file: SLConsoleWindowsSTK.exe
Sun Solaris installer file: SLConsoleSolarisSTK.bin
2. Follow the guided instructions to complete the installation.