Figure 5-13 – Sun Microsystems StreamLine SL8500 User Manual
Page 136
Setting the Write Protect Switch
96 StreamLine™ SL8500 Modular Library System User's Guide • March 2007
Revision K • 96154
Setting the T10000 Write Protect Switch to
Read/Write
You can set the T10000 write protect switch so that the cartridge is read-only (nothing
can be written on the tape). Slide the switch (
) to the write protect
position. In this position, the drive can only read data from the tape and can not write
data.
Setting the LTO Ultrium Write Protect Switch to
Read-Only
You can set the LTO Ultrium write protect switch so that the cartridge is read-only
(nothing can be written on the tape). Slide the switch (
) so that the “closed
lock” is revealed. In this position, the drive can only read data from the tape and can
not write data to it.
Setting the LTO Ultrium Write Protect Switch to
Read/Write
You can set the LTO Ultrium write protect switch so that the cartridge is write-enabled.
Slide the switch (
) so that the “open lock” is revealed. In this position, the
drive can write as well as read data. This setting is recommended when you enter
cartridges into the library.
FIGURE 5-13
Setting the T10000 Cartridge Write Protect Switch
1. Write protect switch (The arrow indicates the
direction in which you move the switch to write
protect the cartridge.)
1
L205 058