To open the door, Locating a cartridge and drive, Figure 4-6 – Sun Microsystems StreamLine SL8500 User Manual

Page 102

Manual Mode of Operation

62 StreamLine™ SL8500 Modular Library System User's Guide • March 2007

Revision K • 96154

▼

To open the door

1. Insert the key and unlock the access door.

2. Pull the paddle handle to activate the opening mechanism and open the access door.

Opening the access door activates a switch, which automatically causes a software

interrupt and stops the robot. Take the key with you so that no one can close the door

while you are inside, and then enter the library.

Locating a Cartridge and Drive

The library management software provides the location and the VOLID of the cartridge

and also the drive bay address available for the manual mount. Before you enter the

library, write down the VOLID, cartridge location, and the drive bay location.

FIGURE 4-6

Library Front View (Access Doors Open)

1. Left access door
2. Robots
3. Right access door

L203_563