Sharp SL-5500 - Manual (Page 110)

Settings 105
During reception of the data, the “Receiving...” message appears on the screen
and the “Add” button becomes ineffective (grayed out).
5.
When the reception of the data is complete, tap the “Add” button on the Infrared
receive screen.
The received data will be added to the specified application or Documents folder
of the receiving unit.
If you tap “Cancel”, the registration is canceled.
6.
Tap the “Beam Receive” application icon displayed on the taskbar to display the
Beam Receive screen, and tap the “Stop” button to cancel receive standby
mode.
Note:
• Be sure to tap the “Stop” button in step 6. Otherwise, the battery, if it is used,
will be exhausted to be in Standby mode.
• If the unit receives the data, which has the same category but belong to the
different application, from the sending unit, the category of the received data
will be changed to “Unfiled”.
File information Displays the file information (File name, type and size).
Information of the
received entry
Displays the simple description of the application entry
received.
Add button Adds the received data to the application (or Documents
folder) of the receiving unit. When the reception of the data
is complete, the “Add” button becomes effective.
Cancel button Tap to cancel registration of the received data.
File information
Add button
Information of the
received entry
12.Settings.fm Page 105 Monday, January 21, 2002 9:21 PM