JVC UX-J99DVD - Manual (Page 76)

73
English
3
Set the shut-off time.
(1) Press cursor 3/2 repeatedly to
adjust the hour.
(2) Press SET.
The minute digits start flashing.
(3) Press cursor 3/2 repeatedly to
adjust the minute.
4) Press SET.
The source name flashes on the display.
4
Select the source to play back.
(1) Press cursor 3/2 repeatedly to
select the source.
• Each time you press the button, the
source changes as follows:
When you select “DISC”
1. Press SET.
2. Select the disc number by pressing cursor
3/2, then
press SET again.
3. Press cursor 3/2 to select the group/title number, then
select track/chapter number.
• If you select a SVCD, VCD or CD, first press SET to
skip the group/title number entry, then enter the track
number.
• If you select a DVD, you can select the title number
and the chapter number. (However, for some DVDs,
SVCDs and VCDs, this does not work properly.)
If there is no disc on the selected disc tray and if the selected
track is the first track, the first track of next disc will be
selected and starts playback when the on-time comes.
When you select “MD”
1. Press SET.
2. Press cursor
3/2 to select the track number.
When you select “TAPE,” prepare it for playback.
When you select “FM” or “AM”
1. Press SET.
2. Select a preset number by pressing cursor
3 or 2.
• If you select “FM – –” or “AM – –,” the station is set to the
last tuned station.
When you select “AUX” or “AUX-DIGITAL,” set the
timer function of the external component as well.
(2) Press SET.
The volume setting appears on the display.
Using Daily Timer
With Daily Timer, you can wake up to your favorite music or radio
program.
• You can set Daily Timer whether the unit is turned on or off (on
standby).
• To correct a mis-entry any time during the setting process, press
CANCEL.
• To exit from the timer setting during the process, press CLOCK/
TIMER repeatedly until the source indication appears.
How Daily Timer actually works
The unit automatically turns on, and starts playing the specified
source when the timer-on time comes. Then, when the timer-off time
comes, the unit automatically turns off (on standby).
Daily Timer works every day, and the timer settings remain stored in
memory until you reset them or unplug the AC power cord.
On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly until
“DAILY TIMER” appears on the display.
The (timer) indicator lights up and the DAILY indicator starts
flashing on the display.
• Each time you press the button, the timer changes as follows:
* Source indication appears only when the unit is turned on.
The hour digits of the start time start flashing.
2
Set the start time.
(1) Press cursor 3/2 repeatedly to
adjust the hour.
(2) Press SET.
The minute digits start flashing.
(3) Press cursor 3/2 repeatedly to
adjust the minute.
(4) Press SET.
The hour digits of the shut-off time start flashing.
REC TIMER
(Recording Timer on/off)
DAILY TIMER
(Daily Timer on/off)
DAILY TIMER
(Daily Timer setting)
Clock setting Source indication*
(canceled)
REC TIMER
(Recording Timer setting)
Ex.: When you set start time to 7:00.
DAILY
Ex.: When you set shut-off time to 8:00.
DISC MD TAPE AUX
AUX-DIGITAL FM AM
DAILY
Using the Timers
(continued)
DAILY
EN71-75_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM 73