JVC UX-J99DVD - Manual (Page 63)

60
English
Moving a Group—MOVE GR
This function allows you to move a group.
Once a group is moved, the tracks and the other groups are
renumbered.
• To stop any time during the editing process below before step
8 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until “MOVE GR ?” appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one or no group, you cannot go to
the following steps.
• During playback:
The group number of the currently playing track will appear.
If the track does not belong to any group, the group number
will be indicated as “– –.”
4
Press GROUP/TITLE >>I or
GROUP/TITLE I<< to select the
group you want to move.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press GROUP/TITLE >>I or
GROUP/TITLE I<< to select the
position where you want to move the
group to.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
8
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING”
flashes while editing you have made is being recorded
on the MD.
Ex.: When group 3 is selected.
Ex.: When group 3 is moved to group 10.
EN54-62_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM 60